10-11AUG2024
Made great progress on the left seat this weekend.
I finished fixing the rear seat support l-angle I messed up last time. I made a wider angle so the holes would not be on the edge. I also cut and drilled all the l-angles for the front support.
I drilled the holes for the slide bolts and the rear nutplates. Once the rear bolts were in, I drilled the holes for the forward bolts. This went way better than the right seat and I didn't have to file any holes open. I did need to retap the welded-in nuts on the top portion of the slides like I did on the right seat.
I also received undrilled rear seat belt brackets from Zenith since the other ones I previously received did not line up correctly. I matched drilled the holes into this new undrilled bracket. The holes are off-center a bit, but they're not too close to the edges so I think it's ok.
Then I started disassembling and drilling holes to final size.
Left Seat Installed
Fixed rear support l-angle (custom wider angle)
Front support l-angles
Front support l-angles
Front support l-angles
Lower Seat Belt Attachment
Rear Seat Belt Bracket - undrilled part match drilled to arm rest side
Left Seat Installed
Build Time: 7 hours 15 minutes