14JUL2024
I started on the left seat today but didn't get too far.
I made spacers for the rear support like I did on the right seat. I also trimmed out the inboard top corner of the rear support because it was interfering with the seat base.
I started on the l-angle for the rear support, but I messed it up (I guess the heat was getting to me and I wasn't thinking). When I was match drilling the l-angle to the arm rest side, I didn't have the rear support fully clecoed in which caused it to sit forward a bit. I clecoed it in and traced the holes from the arm rest side onto the l-angle. The holes are too close to the edge, so I can't salvage this piece. I'll be making a new l-angle next time.
Left Seat Rear Support Spacer
Left Seat Rear Support - inboard top corner trimmed
Messed up rear support l-angle
Build Time: 3 hours 30 minutes