11DEC2022
I felt like I made good progress today. Started off by finishing deburring the edges on the ribs, then opened the holes up to #30. Then I started clecoing the skeleton together.
The one nose rib that needed the jog in it didn't take nearly as long to do this time; the gap also wasn't as bad as the right wing.
I was having trouble getting the end nose rib to fit again, so I'll come back to that later. The skeleton has been clecoed and now it's ready to be taken apart, primed and holes deburred.
Left Wing Skeleton
Left Wing Skeleton
Rib Gap - Before
Rib Gap - After
Build Time: 3 hours 30 minutes